Material Development

How to Choose Unidirectional Carbon Fabric for Wholesale: Toray Fibers vs Fiberglass vs Basalt

I took over purchasing for our composites shop in 2020. Back then, I bought fabric the way most people do: I asked three suppliers for a per-yard price and picked the middle one. That worked until we started mixing structural parts, waterproof covers, and tooling in the same purchase order.

Now I manage about $650,000 a year across nine vendors. The lesson? How to choose unidirectional carbon fabric for wholesale is not a price question. It is a fit question. Same for fiberglass fabric wholesale and bulk basalt fiber fabric. And yes, Toray waterproof fabric belongs in a different conversation than Toray fibers for composites.

Here is the framework I use: performance-to-weight, true cost, processing compatibility, and supply traceability. I will compare unidirectional carbon fabric, fiberglass, basalt, and Toray textile lines directly.

Performance-to-weight: carbon wins, but not by the same margin everywhere

Unidirectional carbon fabric is the one most buyers ask about first. It puts fiber in one direction, so you can align stiffness where the load goes. Toray fibers, especially the TORAYCA line, are a reference point for this. According to Toray (toray.com), TORAYCA grades range from T300 to T1200, with different strength and modulus targets. That range matters because a wholesale quote for unidirectional carbon fabric can be T300, T700, T800, or something else. They are not interchangeable.

Fiberglass fabric wholesale is the workhorse. It is heavier for the same stiffness, but it is forgiving, electrically insulating, and usually easier on the budget. Bulk basalt fiber fabric sits between the two in some properties. It can handle higher temperatures than E-glass and has good alkali resistance, which is why you see it in concrete reinforcement and some industrial applications. But basalt is not a drop-in replacement for carbon. The surprise for me was not the performance gap. It was how often basalt suppliers quoted a fabric without telling us the sizing or the roving source.

Toray waterproof fabric is a separate category. It is a textile finish and membrane story, not a structural reinforcement story. If you need a waterproof shell, compare hydrostatic head, MVTR, and seam tape compatibility. Do not compare it to unidirectional carbon on tensile modulus. That is an apples-to-oranges mistake I see in RFQs.

Direct comparison: weight-critical parts go carbon. Cost-driven panels go fiberglass. Alkali or high-temp non-critical parts can go basalt. Waterproof soft goods go Toray waterproof fabric or an equivalent textile line.

True cost: per-yard price is the wrong number

In Q4 2024, we reviewed quotes for 50-roll and 100-meter volumes. E-glass 6 oz fabric came in around $2.10 to $5.80 per yard. Basalt 6 oz was roughly $4.90 to $11.00 per yard. Toray T700 unidirectional carbon, 12K, ran about $38 to $72 per meter depending on areal weight and width. Prices as of Q4 2024; verify current pricing with your distributor because sizing, width, and freight change the number fast.

But the sticker price is not the cost. I only believed this after ignoring it once. In 2022, I found a bulk basalt fiber fabric quote that was 18% cheaper than our regular supplier. I ordered 400 yards. The vendor sent a handwritten receipt and no lot traceability. Finance rejected the expense. I ate $3,100 from the department budget. They warned me about invoice capability. I did not listen. Now I verify invoicing, lot numbers, and resin compatibility before any order. (Note to self: never skip that check again.)

Most buyers focus on dollars per yard and completely miss the cost of scrap, rework, and downtime. The question everyone asks is, what is your best price? The question they should ask is, what is included in that price and what happens when a roll fails?

Processing compatibility: the hidden gate

This is where wholesale fabric decisions get made or broken. Unidirectional carbon fabric needs the right sizing for your resin. Epoxy, vinyl ester, and polyester do not all like the same finish. Fiberglass fabric wholesale often comes with silane sizing, but the exact chemistry varies. Bulk basalt fiber fabric may have sizing that is optimized for concrete, not for your epoxy. If you are wet layup, prepreg, or infusion, the sizing matters.

Toray fibers come with datasheets and process guidance. That does not mean every Toray product is aerospace-grade. It means you can ask for the data. Toray waterproof fabric has its own finishing and lamination requirements, so keep those specs separate from composite reinforcements.

Three things: tow size. Areal weight. Sizing. In that order. A 12K unidirectional carbon fabric and a 24K fabric can look similar in a photo and behave differently in a mold. A 300 gsm fiberglass and a 600 gsm fiberglass are not interchangeable without changing your layup schedule.

Reverse validation: I learned to check sizing only after a vendor shipped basalt fabric with a concrete-optimized finish. The resin did not wet out evenly. We lost two days and about $1,800 in labor. The material was fine. The finish was wrong.

Supply, traceability, and MOQ

Toray fibers usually come with stronger lot traceability than commodity fiberglass fabric wholesale. That is not a knock on fiberglass. It is a supply-chain reality. Aerospace and industrial customers pay for documentation. If you need certificates, test reports, and consistent lots, you pay for them in MOQ and lead time.

Bulk basalt fiber fabric is still a developing supply chain. Some suppliers are excellent. Some are resellers with no control over roving. Ask for the roving source, the sizing type, and the lot number. If they cannot answer, you are buying a commodity, not a spec.

According to ASTM D3039 (ASTM International), tensile properties of polymer matrix composites are measured under defined specimen and test conditions. That matters because a supplier can quote a fiber property that never shows up in your finished laminate. Ask for laminate data, not just fiber data.

Per EU REACH (EC 1907/2006), you should verify substance restrictions for your market. This is not optional if you export to Europe. Regulatory information is for general guidance only. Consult official sources for current requirements.

Scenario-based choices

Here is how I would choose, based on our own orders and the mistakes we made.

  • Weight-critical structural parts: unidirectional carbon fabric from Toray fibers or an equivalent qualified source. Check grade, tow size, sizing, and laminate data.
  • Cost-sensitive panels, enclosures, and general reinforcement: fiberglass fabric wholesale. Verify sizing for your resin and check roll-to-roll consistency.
  • Alkali, high-temp, or non-critical industrial parts: bulk basalt fiber fabric. Get roving source and sizing. Do not assume it replaces carbon.
  • Waterproof soft goods, covers, and textile laminates: Toray waterproof fabric. Compare hydrostatic head, breathability, and seam performance.

If you are still asking, how to choose unidirectional carbon fabric for wholesale, start with the part. Not the price list. Write down the load, the process, the resin, and the documentation your customer needs. Then compare suppliers against those four things.

The industry is evolving. In 2020, price per yard was often enough. In 2025, traceability, sizing, and regulatory paperwork are part of the material.

What was best practice in 2020 may not apply in 2025. The fundamentals have not changed, but the execution has.

Simple. But not easy.

Mireille Fontaine
Mireille Fontaine

Mireille Fontaine is a textile quality, compliance, and sourcing analyst covering apparel fabrics, interior textiles, performance materials, coated fabrics, nonwovens, fibres, recycled-content claims, chemical restrictions, and mill production terms. She uses ISO 14040 and ISO 14044 life-cycle boundaries alongside lot-based inspection data while comparing declared composition, restricted-substance evidence, chain of custody, colour difference, defect rate, MOQ, sampling lead time, yield loss, and replacement risk. Her procurement guides help brands, importers, and manufacturers compare supplier claims, test-report scope, bulk tolerances, traceability, environmental disclosures, and total delivered value.